Tuesday, 17 January 2017

Ragged Lavender Hearts

I know it's a long time since Mrs Tittlemouse got her act together and posted anything but here I am, with a little creative idea that I thought you might like, if you're still reading, that is, and I can well understand it, if you have moved on to less stagnant waters over the last six months or so! Anyway, here it is. A little tutorial for making frugal, ragged, lavender hearts like this one.


The other day my favourite pair of pyjamas - a brushed cotton Cath Kidston pair, duck-egg blue, spotted with white polka dots - finally gave up the ghost. Recent launderings had flagged up the fact that the main fabric had faded quite a bit and got very thin in places but I crossed my fingers and hoped it would continue to hold out. Sadly, it didn't. I considered mending the large rent that had appeared all of a sudden "and without any invitation" (to quote the original Mrs Tittlemouse) by my right shoulder but regretfully decided the fabric simply wasn't strong enough to take a patch that wouldn't quickly tear away.

The main duck-egg-blue-spotted-with-white-polka-dots fabric of the pyjamas had been delightfully paired with a contrasting duck-egg blue and rose-sprigged print to make the collar, facings and placket on the jacket and the small back pocket on the trousers as well as trimming the sleeve and trouser cuffs. I really wanted to salvage that pretty, rose-sprigged fabric but close inspection revealed there was very little of it to play with. What could I make?

After humming and hawing over various possibilities, I opted for something very small and simple but surprisingly satisfactory - ragged, lavender-filled hearts. I pass it on, in case you too have a pretty brushed cotton nightdress or pair of pyjamas that have seen better days that you can't bear to part with, though, of course, there's nothing to stop you using new fabric, if all your winter nightwear is in good shape!

What you do:
1 Draw out a simple heart-shaped template. Mine is about 12 cm / 4.5" tall and 12 cm / 4.5" wide. Too small and it will be too fiddly to sew and stuff; too large and you'll need more fabric and a lot of lavender to fill it. If you want to use the pattern I drew, I have managed, (I hope), to upload it as a pdf here. Make sure you print it out at 100% scale.

2 Press your fabric pieces and if, like me, you are cutting up worn out clothing, choose a less worn part of the fabric, at least for the outer two of the four hearts you will need for each ragged lavender heart. If again, like me, you are after a fabric only used in very small quantity on the garment, look carefully at where it's deployed to see what you can salvage. Carefully unpick any stitching and lay out what you have. You may need, as I did, to stitch smaller strips together to give you enough to cut from. Just match and stitch together as required, pressing open the seams before laying out for cutting out your hearts.


3 Cut out four hearts for each lavender bag. Two of these can be cut from less good portions of the fabric as they won't be seen. I cut my inner hearts from the rather more plentiful supply of faded main fabric, saving the rose-sprigged ones for the outer hearts. I was quite chuffed to manage to realise three ragged, lavender bags in total like this, although only one, made from the placket on the inside back of the jacket, is free from piecing-together seams, The others all needed some strategic joining together - see 2 above.

4 For each finished lavender bag, place four hearts together with the right side of the top and the bottom heart facing outwards. Pin together.


5 Cut a small piece of ribbon - about 15cm / 6" long - and fold in half lengthways. Insert the raw edges about 2cm / .75" below the edge into the central dip of the heart and pin in place to secure.

6 Using a matching sewing thread, machine stitch all round the heart about .75 cm / a quarter of an inch in from the edge, leaving a gap of approximately 2 cm / .75" on one of the long sides so that you can fill the heart with lavender. Yes, I do mean stitch on the outside with the seam allowances showing! The red-headed pins mark my filling gap in the pics above and below.


7 Fill the heart with dried lavender using a funnel and a spoon to help you. Make sure you spoon the lavender into the centre of the heart ie between the two innermost layers of fabric, leaving two layers on the outside, on both sides, as you can see in the pic below where my scissors are holding open the gap.


 A container is helpful to catch the lavender you will inevitably spill. I rather foolishly decided to do the filling, while sitting up in bed. Let's just say that finding grains of dried lavender in your sheets may smell wonderful but isn't exactly comfortable! If you have dried lavender from the garden, use that, or alternatively you can buy it, by the bagful, from suppliers such as this one. It's expensive if you buy a big bag but remember dried lavender does not weigh much in relation to its volume and you won't need more than around 10g / 0.5oz for each of these.

8 Don't overfill the heart, or it will make it difficult to stitch up the gap. Also, I think a little looseness is nice in lavender bags. Once you have filled the heart adequately, pin the gap shut, to avoid losing any precious florets, and stitch the gap closed, joining up the two ends of the seam left previously. If you've overfilled the heart with lavender, you may not be able to lower the presser foot on your machine properly to stitch the gap closed. Either remove some of the lavender to give yourself a bit more room or alternatively, if you prefer the heart to be more plumply filled, you could switch your foot to a zipper foot to enable you to sew easily.


Neatly tie off the threads and snip the ends so that it looks tidy.

9 Now take a pair of pinking shears and carefully trim the edge of the seam allowance which is left on the outside to give a nice zigzag edge. Be extra careful around the dip of the heart where the hanging ribbon is attached, as you don't want to cut the ribbon by mistake.



10 Hang your heart from a clothes-hanger or place in a drawer and enjoy.



The multiple layers of brushed cotton fabric make these hearts beautifully soft and tactile.


 As well as giving them a nice fluffy edge.


You can obviously make these with brand new fabric but I think you can't beat the softness of something much-laundered and worn. If you don't wear brushed-cotton pyjamas, mens' casual shirts are sometimes made from brushed cotton so a worn out, old one of these would be an alternative hunting ground, although it probably won't have pretty, rosy sprigs on it! But you could always prettify a manly tartan check with some embroidery, or a decorative button or two.


I am wondering what other things one might make with brushed cotton. Other than polishing rags, of course. I see you can make a very attractive rag quilt using brushed cotton squares but I don't have enough fabric for that. Shoe bags are another possibility and it's good for baby accessories.  Any other suggestions? Do let me know if you have any bright ideas - I have quite a lot of pyjama fabric still to play with!

Thank you for still being there, if you're reading this. I wish you a happy 2017 and hope to be back here again soon.

E x